3708 NW 82nd Street Miami Florida 33147 Office: 305-696-0419
Fax: 305-696-0461 E-Mail: LAOrnamental@aol.com

" Your One Stop Shop For All Your Driveway Gate Needs"

Gate Opener Brands:
Access Control Brands:
Same Day Order Processing, In Stock Items Usually Ship in 1-2 Business Days

GATE OPENER BRANDS

 

 

Preformed Loop Systems, Loop Wire, Driveway Performed Loop Sensor

 
Preformed Direct Burial Loops

Preformed Direct Burial Loops

Used for installations under concrete, asphalt, pavers, or  gravel roads. The most common installation is the loop tied  directly to the rebar before concrete is poured. Wire is UL 493  certified designed for a direct burial application.

Unlike loops wrapped through PVC, The BD Loops Direct Burial  Loop does not have an air pocket resulting in fewer repeat  service calls due to phantom detections caused by ground  vibration. Built with a high quality solid 14AWG wire out  performing other preformed loops with twice as much copper  per foot and increased tensile strength.

Solid 14AWG wire also results in the direct burial loop being  very ridged giving the installer the opportunity to easily set-up  and layout the loop and prevents the loop from falling in- between the rebar patter. Twisted jacketed lead-in prevents  “coil back” from normal twisted lead-in, preventing wasted time  untangling lead-in wires. The loop wire has arrows indicating  the direction of current allowing easy understanding of  phasing.

Each direct burial loop comes with an installation kit including  easy to understand instructions, cable ties for installation on  top of rebar, ground stakes for under gravel roads, and  stickers for easy identification after the loops have been  installed.

Recommended installation tips:
•Offset the direct burial loop from the rebar pattern.
•Run lead-in through conduit.
•Residential applications recommend a 4’ short leg of the loop.
•Commercial application recommend a 6’ short leg of the loop.


Direct Burial Preform Loops

BD Loops - Reverse Loop / Safety Loop -4' X 6' or 3' x 7' Direct Burial Performed  Loops with 40' Lead -- $ 80.50

   

BD Loops - Reverse Loop / Safety Loop -4' X 8' or 6' x 6' Direct Burial Performed Loops with 40' Lead -- $ 83.13

   

BD Loops - Exit Loop - 4' X 6' or 3' x 7' Direct Burial Performed Loops with 60' Lead -- $ 93.63

   

BD Loops - Exit Loop - 4' X 8' or 6' x 6' Direct Burial Performed Loops with 60' Lead -- $ 95.38

   

Exit Loop - 4' X 10' or 6' x 8' Direct Burial Performed Loops with 60' Lead -- $ 105.00

   

BD Loops - Reverse Loop / Safety Loop -4' X 12' or 6' x 10' Direct Burial Performed Loops with 40' Lead -- $ 106.75

 

BD Loops - Exit Loop - 4' X 8' or 6' x 6' Direct Burial Performed Loops with 100' Lead -- $ 113.75

 

BD Loops - Reverse Loop / Safety Loop -6' X 12' Direct Burial Performed Loops with 40' Lead -- $ 117.25

 

BD Loops - Exit Loop - 4' X 12' or 6' x 10' Direct Burial Performed Loops with 60' Lead -- $ 120.75

 

BD Loops - Exit Loop - 6' X 12' Direct Burial Performed Loops with 60' Lead --$ 122.50

 

BD Loops - Exit Loop - 6' X 14' Direct Burial Performed Loops with 60' Lead --$ 131.25

 

BD Loops - Reverse Loop / Safety Loop -6' X 20' Direct Burial Performed Loops with 40' Lead -- $ 131.25

 

BD Loops - Exit Loop - 4' X 10' or 6' x 8' Direct Burial Performed Loops with 100' Lead -- $ 131.25

 

BD Loops - Exit Loop - 6' X 16' Direct Burial Performed Loops with 60' Lead --$ 133.00

 

BD Loops - Exit Loop - 4' X 12' or 6' x 10' Direct Burial Performed Loops with 100' Lead -- $ 135.63

 

BD Loops - Exit Loop - 6' X 12' Direct Burial Performed Loops with 100' Lead --$ 139.13

 

BD Loops - Exit Loop - 6' X 20' Direct Burial Performed Loops with 60' Lead -- $ 147.00

 

BD Loops - Exit Loop - 6' X 14' Direct Burial Performed Loops with 100' Lead -- $ 148.75

 

BD Loops - Exit Loop - 6' X 16' Direct Burial Performed Loops with 100' Lead -- $ 152.25

 

BD Loops - Exit Loop - 6' X 20' Direct Burial Performed Loops with 100' Lead --$ 165.38

 

Preformed 3/16” Saw-cut Loop
Used for saw-cut installations where a 3/16” groove is cut into  the concrete or asphalt and the wire is stuffed and sealed  (using loop sealent) into the surface.
Our saw-cut loops have a custom polyethylene outer jacket  protects a micro-dusted nylon coated inner jacketed 16AWG  stranded wire. The saw-cut loop has a built in backer-rod securely fitting a 3/16” saw-cut groove eliminating the need to apply backer-rod to hold the loop to the bottom of the saw-cut 
groove and requires 30-40% less loop sealant to seal the groove.
The entire loop including the lead-in fits within a 3/16” saw-cut groove preventing wasted time spent double saw-cutting or doubling blades to cut the home run lead-in.
•Works best with 3/16" saw-cut blade or wider. (Does not work  with 1/8" blade.)
•Can be used with 1/4" blade.
•Use the TB-Kit to ensure the groove is cut exactly every time.
•Loop should only be installed black side up to ensure phasing direction matches.
•Align loop over saw-cut groove before insertion into the  groove will prevent having to pull up and realign a “tight- fitting” loop.
•Loops are not normally seen by your customers, if one doesn’t  work its likely other parts/work will be blamed. BD Loops has  the best performance track record in the industry - insuring the  quality of your work.
•All loops are made with 14 & 16AWG two to three times at much  copper per foot vs. 18AWG.
•Will save you 15-30min per loop in installation time vs. wrapping your own.
•9 years of business 200,000 loops installed and only 1 loop failure.
•Designed to save installers 15-30min per loop. By installing 3 loops, installers can cut one and a half hours of labor costs; worth close to $150.
•The savings pay for the cost of the loops.
•A better quality product.

Loop Sealant - Q-SEAL 290S Loop Sealant, Asphalt Black -- $ 24.95

Add to Cart

Loop Sealant - Q-SEAL 290S Loop Sealant, Concrete Gray -- $ 24.95

Add to Cart

Pre-Form Saw Loops

BD Loops - Reverse Loop / Safety Loop -4' X 6' or 3' x 7' Saw Cut Performed Loops with 20' Lead -- $ 77.88

 

BD Loops - Reverse Loop / Safety Loop -4' X 8' or 6' x 6' Saw Cut Performed Loops with 20' Lead -- $ 78.75

 

BD Loops - Exit Loop - 4' X 6' or 3' x 7' Saw Cut Performed Loops with 50' Lead -- $ 91.88

 

BD Loops - Exit Loop - 4' X 8' or 6' x 6' Saw Cut Performed Loops with 50' Lead -- $ 93.63

 

BD Loops - Reverse Loop / Safety Loop -4' X 12' or 6' x 10' Saw Cut Performed Loops with 20' Lead -- $ 103.25

 

BD Loops - Exit Loop - 4' X 10' or 6' x 8' Saw Cut Performed Loops with 50' Lead - $ 105.00

 

BD Loops - Reverse Loop / Safety Loop -6' X 12' Saw Cut Performed Loops with 20' Lead -- $ 112.00

 

BD Loops - Exit Loop - 4' X 8' or 6' x 6' Saw Cut Performed Loops with 100' Lead - $ 112.00

 

BD Loops - Exit Loop - 4' X 12' or 6' x 10' Saw Cut Performed Loops with 50' Lead - $ 117.25

 

BD Loops - Exit Loop - 6' X 12' Saw Cut Performed Loops with 50' Lead - $ 122.50

 

BD Loops - Reverse Loop / Safety Loop -6' X 16' Saw Cut Performed Loops with 20' Lead -- $ 122.50

 

BD Loops - Exit Loop - 6' X 14' Saw Cut Performed Loops with 50' Lead - $ 126.88

 

BD Loops - Reverse Loop / Safety Loop -6' X 20' Saw Cut Performed Loops with 20' Lead -- $ 127.75

 

BD Loops - Exit Loop - 6' X 16' Saw Cut Performed Loops with 50' Lead - $ 131.25

 

BD Loops - Exit Loop - 4' X 10' or 6' x 8' Saw Cut Performed Loops with 100' Lead -- $ 131.25

 

BD Loops - Exit Loop - 4' X 12' or 6' x 10' Saw Cut Performed Loops with 100' Lead - $ 138.25

 

BD Loops - Exit Loop - 6' X 20' Saw Cut Performed Loops with 50' Lead -- $ 145.25

 

BD Loops - Exit Loop - 6' X 12' Saw Cut Performed Loops with 100' Lead --$ 145.25

 

BD Loops - Exit Loop - 6' X 14' Saw Cut Performed Loops with 100' Lead -$ 150.50

 

BD Loops - Exit Loop - 6' X 16' Saw Cut Performed Loops with 100' Lead -$ 156.63

 

BD Loops - Exit Loop - 6' X 20' Saw Cut Performed Loops with 100' Lead -$ 168.00

 

 

About Us  |   Contact Us   |   Our Policies  | Paint Chart  |  Histroy of Wrought Iron |
Copyright Protected 2014 - L. A. Ornamental & Rack Corp.  All rights reserved. No part of this site can be reproduced in any form or by any means, electronic, mechanical, photocopying, or otherwise without prior written consent of L. A. Ornamental & Rack Corp. 3708 NW 82nd Street  Miami  Florida  33147, Office: 305-696-0419  Fax: 305-696-0461
E-mail:
LAOrnamental@Aol.com

SIGMA