Standard Features:
• TEC 2 display provides 2 lines and 1 name per directory
screen.
• Displays are backlit and visible in bright sunlight .
• Two entrance control with 2 relays.
• Non-volatile memory.
• Dials Touch ToneTM or pulse.
• Talk time programmable, 1 to 99 minutes.
• Remote relay activation and latching.
• Programmable door open and alarm time.
• Remotely activated speaker and microphone via touch tone
after passcode.
• Programmable “strike out” for PIN attempts.
• Programmable via keypad.
• Mutes tones while dialing.
• Postal lock capability.
• Programmable open keypad for voice mail.
• Remotely activated speaker and microphone.
• Programmable code and PIN lengths, 1 to 6.
• REX (request to exit), alarm shunt and door sense input.
Multi-level surge suppression protects all
electrical connections. Must be grounded.
Options:
• 56K Baud modem with TEC Basic software package.
• NIC, network interface card provides a TCP/IP interface for
network programming.
• OPTKC125 to OPTKC2000 card reader capability, includes
two reader input board.
• OPTK4DR is a plug-on board for expanding the TEC II and
TEC IV from 2 reader inputs to 4 reader inputs.
• RS232 or current loop serial communications.
• Semi-Flush mount ring.
• Door sense input & alarm shunt output relay.
• CCD black & white or color cameras.
• Clock calendar.
• Selcom Secured™ software for access control programming.
• Special finishes available upon request.
• Pedestals and pedestal adapters. |
Capaacity:
• Up to 2,000 phone numbers.
• Up to 2,000 PIN codes.
• Up to 2,000 cards (option).
• Up to 4 entrances, (2 entrances standard)
• 4 TEC2's may share one phone line using
MUI’s (one each) and all can be programmed
remotely.
• Programming for Windows XP or Vista using either
TEC Basic or Selcom Secured™ (option). Compatibility
for NT (single user) is provided with Selcom
Secured™.
• Code / Phone / Card capacities can be upgraded by
the factory, through authorized dealers only.
Specifications:
TEC2:
• Dimensions: 9 1/2'” W x 13 1/2” H x 3 1/8” D
semi flush mount:: 14 5/8” W x 18 5/8” H
• Material Used: Housing- 12 ga. structural aluminum;
Door- 16 ga.stainless steel
• Finish: aluminum back box: Painted weather
resistant finish.
• Power Input: 18 VAC, 40 VA UL listed transformer
(provided with unit).
• Modem: 56 kBaud (option)
• Emergency Battery: 12V .7 AHR GEL CELL on
constant charge (for control of line voltage variation
and short term telephone support only, optional).
• Telephone Line: Standard voice grade RJ11C Jack.
• Mounting: Surface, flush or pedestal mount.
• Memory Type: Non-volatile.
• Tone Detection: Crystal controlled, capable of
detecting short burst 50MS DTMF tone.
• Shipping Weight: Approx. 15 lbs.
GENERAL:
• Operating Environment: Temp.: -20º to 60º C,
Relative humidity: 5% to 95% non-condensing.
• Relay Output: Form A/B dry contact 24V @ 3AMP.
• FCC Reg.: #CPW74F63331MTE.
• ARL LISTED (UL Equivalent) |
