GTO F3101MBC Wireless Intercom System, Entry Gate Intercom
GTO ESTATE WIRELESS INTERCOM / KEYPAD ( GTO F3100MBC )
Designed for added security to your automated gate with the ability to “speak to” and “screen” visitors safely from inside your home. Ideal for securing gate entrances while providing controlled access. You can add up to three additional base stations (one included) for four total interior base stations to allow access from multiple rooms. ( GTO F3101MBC )
Regular Price: $450.00
GTO F3100MBC Residential Wireless Intercom/Keypad KIT-allows up to 4 int. units -- $269.00
The Heddolf door opener receiver allows you to use the same Mighty Mule two button transmitter or three button transmitter to operate your gate opener as well as your garage door opener.
||GTO is made by the Mighty Mule company and offers gate openers and garage door remotes that operate on 318 Mhz and have 9 trinary dip switches. There are other brand that are compatible
Intercom System Base Unit Wireless (GTO F3101MBC)
This additional digital intercom can be added to the F3100. Up to 4 can be added. The intercom provides superior range with crystal clear two-way communication up to 500 feet wireless or 1,000 feet wired.
Designed for added security to your
automated gate with the ability to “speak
to” and “screen” visitors safely from
inside your home. Ideal for securing gate
entrances while providing controlled
• Increased Surveillance: Screen visitors and
solicitors safely from inside your home.
• Superior Range: Crystal clear two-way wireless
communication up to 500 ft. (152.4 m).
• Stand Alone Keypad: Program up to 100 entry
codes for added security.
Motion activated backlit keypad
Attractive aluminum faceplate
Vandal resistant locked housing
• Access Control: Accept or deny access to your
property with the touch of a button.
• Interior intercom is mobile and can be used
anywhere in your home (battery and charger
• Accepts up to 4 base stations: Kit includes one
base station with rechargeble battery.
• Exterior Intercom/Keypad can be powered with
four “AA” batteries (not included) or the gate
operator’s 12 Volt DC power source.
Designed for today’s estate gate entrances. This access system provides added security to your automated gate with the ability to “speak to” and “screen” visitors safely from inside your home.
IDEAL FOR SECURING GATE ENTRANCES WHILE PROVIDING CONTROLED ACCESS.
• Increased Surveillance: Screen visitors and solicitors safely from inside your home.
• Superior Range: Crystal clear two-way communication up to 500 ft. (152.4 m) wireless or wired remotely up to 1000 ft. (304.8 m) for enhanced range.
• Stand Alone Intercom/Keypad: Program up to one hundred (100) entry codes for added security.
– Motion activated backlit keypad
– Camera Ready for optional video camera
– Attractive Aluminum Faceplate
– Vandal resistant locked housing,
– Exterior Intercom/Keypad can be powered with four “AA” batteries (not included)or the gate operator’s 12 Volt DC power source.
• Interior intercom is mobile and can be used anywhere in your home just like a cordless phone.
(battery and charger included)
• Accepts up to 4 base stations Kit includes one base station with rechargeble battery.
Features of the Estate Intercom / Wireless Keypad
The ESTATE WIRELESS INTERCOM has two separate units. The WIRELESS KEYPAD (outside unit) should be mounted outside the gate allowing the driver of the vehicle approaching the property to press the CALL button from their vehicle. The BASE (inside unit), with it’s rechargeable battery, can be plugged into any 110 Volt AC outlet for use while charging. It can also be disconnected from the charger allowing it to go any where within range for convenience. Up to three additional BASES can be added for convenience in different locations throughout the house in a wireless application. (hardwired applications can have only one interior base station)
When someone without an access code approaches the gate, they can press the CALL button on the keypad which will ring the BASE unit inside the house. To answer the CALL, the person inside presses and holds the ANSWER button to talk to the person at the gate, releasing the ANSWER button to listen. To allow the person calling to open the gate, the GRANT PERMISSION button must be pressed. Then the person at the gate can press any number key on the KEYPAD to open the gate. The "END CALL" button terminates the call. (see page 4 for programming)
Up to 100 different personal entry codes may be programmed into the KEYPAD, allowing you to give different temporary and permanent entry codes to different users. For example, you can give a delivery person their own temporary entry code, which will expire after 1-7 days. This will prevent him from being able to regain access, while still allowing those to whom you gave permanent entry codes full access.
After entering a valid code, the keypad is active for 40 seconds - pressing any key on the KEYPAD while the gate is opening will stop the gate; pressing any key while the gate is stopped will cause the gate to reverse direction. The KEYPAD will not affect the auto-close setting of your gate opener system.
The KEYPAD number pad will light up as you approach the keypad and the unit will beep at the press of any key. The KEYPAD memory will recognize your entry code in a string of up to 20 digits. If it finds the correct sequence, it will activate the gate opener. As a security feature, the keypad will shut down for 40 seconds if it does not find the correct code sequence within a 20 digit string. This will discourage an unauthorized person from trying to use random numbers to access your property.
Your entry codes will remain stored in memory even when the batteries go dead. The KEYPAD will remember your entry codes as long as you don’t press the RESET button.
IMPORTANT: In areas of high radio frequency (RF) interference, the KEYPAD may need to be connected (hard wired) directly to the gate opener using 16 gauge (AWG) stranded, direct burial, low voltage wire (GTO part no. RB509 not included).
Also in areas of high radio frequency (RF) interference, the BASE unit may not communicate with the KEYPAD and will require hardwiring from the KEYPAD to the BASE with co-ax cable (RG59 or RG6 which is not included). See page 8 for details.